Apr 27, 2012 I have model hd 1688 RADIO CONTROLED and it will not reset. I put new battery still just runs around a gouple of - Answered by a verified Electronics Technician We use cookies to give you the best possible experience on our website. Tel: 0086 78 ext.8319 Fax:0086 71 Mail: claire@dgshengbang.com.cn. Hd 1688 Sheng Bang Pendulum The National Institute of Standards and Technology and WWVB encode a special DST 'bit' in the WWVB transmission for DST. Your Radio Controlled clock will read this information and automatically advance the hands one hour in the spring and eleven hours in the fall. Press the manual time setting tab on the back of the clock 15 times. Put the battery back into the clock. The clock will go to 4:00, 8:00, or 12:00 and stay there while waiting for the signal. Immediately after your clock stops at 4:00, 8:00, or 12:00, push and hold the manual time set tab until you get to the correct time.
Clock Movement,Quartz Clock Movement,Wall Clock Movement-DM2001
Item: Step-DM2001 Clock Movement,Quartz Clock Movment,Wall Clock Movement,Clock Mechanism Features: 1. Quartz crystal frequency:32768HZ 2. Operating voltage range:1.3V to 1.7V DC 3. Operati..
Clock and Watch Parts plastic wall clock part / quartz clock movement / wall clock movement
Product Description Clock and Watch Parts plastic wall clock part / quartz clock movement / wall clock movement ..
plastic wall clock parts / quartz clock movement / wall clock movement
plastic quartz wall clock parts with CE ROHS 1.Measure:56*56*16mm 2.Material: plastic 3.Battery:R6/AA/1.5V 4.Certificate:CE/RoHS 5.Accuracy:+-1 sec.day Other type: ..
promotion quartz wall clock/quartz clock movement
quartz wall clock/quartz clock movement/wall clocks quartz Name quartz wall clock Size 31*31*4.5CM Model IJ-113P ColorANY MOQ 1000 p..
12 mm shaft length quartz clock movement/quartz wall clock parts
1.12 mm shaft length quartz clock movement/quartz wall clock parts 2.Speficication (1)Clock movement Model No. 2008 Hyper-sweepSize56x56x16mm Net weight28gShaft Length 12mmBattery AA/12monthsCertifications ..
Classical wooden quartz clock movement
Classical wooden quartz clock movement, Oak color, PVC dial, Quality Movement, Competitive price, CE, RoHS Certificate, OEM & ODM available, Be manu..
Quartz clock movement
quartz clock movement HR1688 movement with hands reasonable price with high quality material :made of ABS size 56*56*16.2mm shaft length :7mm 8 mm 9mm 11mm 13mm 17mm 20mm 23mm packing :paper ca..
quartz clock movement
quartz clock movement HR1688 Model: HR1688 Description : standard movement / quartz movement / hourly chime movement /step movement Size :56×56×16.2 Net weight:25g Operating Vol..
Classical wooden quartz clock movement
Classical wooden quartz clock movement, Oak color, PVC dial, Quality Movement, Competitive price, CE, RoHS Certificate, OEM & ODM available, Be manu..
trigger quartz clock movement
Front : Side : Items: RZ-TM014 Size: 56x56x14mm Shaft length: 14mm These movements with two lines are triggered to the musice box,then they gives s..
155mm Skeleton quartz clock movement
Metal Quartz Skeleton Movement Items No.: RZ-KM3-WG Size: 45X80X107mm Dial size: 113mm&155mm Materials: Copper or Alloy for your choice Plating: Gold Advantage: M..
Quartz Clock Movement
quartz clock movement HR1688 movement with hands reasonable price with high quality material :made of ABS size 56*56*16.2mm shaft length :7mm 8 mm 9mm 11mm 13mm 17mm 20mm 23mm packing :paper ca..
Sweep Quartz Clock Movement ML6262
Sweep Quartz Clock Movement ML6262 Dimension: 56x56x16mm Shaft Length: 12mm Net Weight: 25g Torque: ≥300μN.M Battery Life: AA/5-8months Measures Of Carton: 370×370&tim..
standard non-alarm quartz clock movement
1)fixing mode:screw type; 2)step second movement; 3)use AA*1 battery. SPECIFICATIONS No Item Specification 1dimension56*56*15mm 2Average time keeping±2sec/day at 1.5v,23°C 3operating voltage DC 1.25V to 1.7V&nbs..
Quartz clock movement with hanger
Complied with CE & RoHS standard..
transparent sweep quartz clock movement
Harmony, Integrity, Innovation and Win-win Benefit Products Description: Description1MaterialABS2Battery R6/AA/1.5V(Not Include)3Packaging PCS /CTN500PCSN W./CTN10.8kgG W./CTN12.3kg..
sweep wall decoration quartz clock movement
Harmony, Integrity, Innovation and Win-win Benefit Products Description: Description1MaterialABS2Battery R6/AA/1.5V(Not Include)3Packaging PCS /CTN500PCSN W./CTN10.8kgG W./CTN12.3kg..
quartz clock movement replacement exporter
quartz clock movement replacement exporter Description:quartz sweep clock movement / quartz silent clock movement / Quartz wall clock movement / quartz wall clock mechanism / quartz silent clock movement / quartz silent clock mechanism / quartz quiet wal..
CE quartz clock parts, Clock Parts, Wall clock parts
Product Description CE quartz clock parts, Clock Parts, Wall clock parts Item number: BG612P-SL/WH Product information 1. Size: 12': 30*4.0*30cm2.&..
Bathroom Wall Clock With Waterproof Plastic Wall Clock For CE Quartz Clock Parts
Plastic Wall Clock Product Description Commodity Plastic Wall Clock Item NO 81338 Material Plastic Color a s your requirement Size 32.5x32.5x4.3CM Packing Bubble Bag + white Box P..
Quick set up instructions
*These instructions are for the brands we offer including Howard Miller and Seiko Clocks. These may or may not work for other brands. We do not have any instructions for other brands outside of Howard Miller and Seiko clocks.
Welcome to the world of radio controlled timekeeping technology. We hope you will enjoy the convenience of never having to set your clock again and the confidence of knowing exactly what time it is.
• Insert 1 fresh AA, LR6 1.5 volt ALKALINE battery
• Press button to select a time zone. THAT'S IT! During the night your clock will automatically set itself.
For a better understanding of how and why your clock works please continue reading.
Nothing is more precisely measured than time!
And nothing keeps track of time more precisely and trouble free than our radio controlled clocks. Since the beginning of time, man has been fascinated with the measurement of time and has devised more accurate machines to trap and measure time. Today, time is precisely measured in the United States by the most accurate clock in North America, the Atomic Clock of the US National Institute of Standards and Technology, Time and Frequency Division in Boulder, Colorado. A team of atomic physicists continually measures every second of every day to an accuracy of ten billionths of a second per day. These physicists have created an international standard, measuring a second as 9,192,631,770 vibrations of a Cesium 133 atom in a vacuum. This atomic clock regulates the WWVB radio transmitter located in Fort Collins, Colorado, where the exact time signal is continuously broadcast throughout the United States at 60 kHz to take advantage of stable long wave radio paths found in that frequency range. Radio waves at these low frequencies use the earth and the ionosphere as a wave-guide and follow the curvature of the earth for long distances.
The built in antenna system will receive the WWVB signal anywhere in North America within 2000 miles of Fort Collins where long-wave radio reception is undisturbed. A microprocessor activates the receiver and processes the time signal from Fort Collins overnight.
Through the radio signals, our radio controlled clocks always keep precise time. The changeover from standard time to daylight savings time, and vice versa, takes place automatically with the same precision.
Additional details
Hd-1688 Sheng Bang User Manual
To set up your clock simply install one fresh AA, LR6 ALKALINE battery. Due to the nature of long wave radio signals it is normally not possible to receive a signal during the day so it is best to install the battery late in the evening. Select your time zone by pressing one of the four time zone buttons PT-Pacific Time, MT-Mountain Time, CT-Central Time, ET-Eastern Time. The time zone buttons may be pressed any time after installing the batteries. If multiple buttons are pressed the clock will set to the time zone selected last. If no time zone is selected the clock will default to Pacific Time. Another time zone can be selected during or after the clock has set itself. Your clock can only set itself to one of the four time zones stated above. For time zones outside of PT, MT, CT or ET you must manually set the time using the Manual Time set button on the back of the movement.
Daylight Savings Time Adjustment.
If you live in Indiana or Arizona you will wish to disable the DST function. After setting your clock press the small button labeled 'DST' located just above and between the ET and CT Time Zone buttons on the back of the movement. Your clock will no longer observe DST.
Manual Setting
Atomic Clocks may also be set manually and be very accurate. Simply insert the battery, press your time zone and then press the flap just above the left side of the battery. Hold until you reach the correct time and then release. Your clock is now an accurate quartz clock until it will find the signal. Your Atomic clock will still continue to look for the signal and start adjusting itself automatically.
Contacttaig jailbreak tool. When the battery is installed the second hand will advance eight seconds (two seconds per step x four steps). The clock is now searching for a signal. For the initial setting, it is recommended to stand the clock in an upright position near a window. Within five minutes the clock will either receive the WWVB signal and set itself to the exact time, or it will determine that the signal is not receivable at its current location and time of day. If a signal is not receivable it will fast-forward the hands to the 4, 8, or 12 o'clock position and search for WWVB each hour until a signal is received. If the time is manually set the clock will continue to periodically search for a signal and automatically reset the hands when the signal is received.
Select a location to place your radio controlled clock where it will be at least six feet away from a TV, computer, air conditioner or other household electrical appliances. The optimal location is near a window. Windows facing Colorado providing the best signal. The WWVB time signal will easily penetrate Masonry and wood-framed buildings. WWVB will penetrate almost every residential building and most steel buildings if they have adequate windows. It is not possible, however, for WWVB to penetrate most indoor shopping malls and rooms in the center of large office buildings that do not have windows. In buildings that WWVB cannot penetrate you may set the time using the manual time set button. When the clock is exposed to the WWVB signal it will automatically set the hands to the exact time.
Our Rwave, Atomic, Radio Controlled clocks do not receive or process radio-controlled time signals from Germany's DCF 77, Japan's J Ga AS, or England's MSFs atomically regulated transmitters. Our Radio Controlled clocks can be manually set and used anywhere.
If your clock did not set the first time or after daylight savings time change, try the following instructions:
1) Take out the battery and place the battery in backward for about 10 seconds, then replace it again in the correct position.
2) Just after replacing the battery, press the Time Zone button for about 5 seconds on the back that corresponds with the time zone where you are located.
3) Shortly after the hands should start turning 20 times their normal speed and stop at 4:00 or 8:00 or 12:00. This means the clock is now looking or waiting for the signal and the clock movement is good.
4) Place the clock near a westerly window overnight and then the clock should reset overnight and read the correct time.
**If you had previously pushed the manual mode flap (switch), take a pen or paperclip and make sure it is pulled out in the off position.
If you live in the Eastern Time Zone, you should manually set your clock using the following procedure:
1. Take the battery out of the clock.
2. Press the manual time setting tab on the back of the clock 15 times.
3. Put the battery back into the clock.
4. The clock will go to 4:00, 8:00, or 12:00 and stay there while waiting for the signal.
5. Immediately after your clock stops at 4:00, 8:00, or 12:00, push and hold the manual time set tab until you get to the correct time.
If you release the button at the incorrect time, take the battery out and start again.
These clocks will automatically continue to check and adjust after April 1.
For more information on the NIST and radio controlled time, see http://www.boulder.nist.gov/timefreq/
Troubleshooting
The wonderful advantage of owning a radio-controlled clock is that it is virtually trouble-free. If the clock receives a clear signal it will set itself perfectly. If it does not receive a signal consider the following:
Battery - The clock must have a fresh battery to receive and process the time signal.
Location - Try a different location, ideally near a window. It should be at least six feet from computers, TVs, air conditioners, other Radio-Controlled clocks and other electrical appliances that cause interference.
Weather - Electrical storms between you and Colorado during the night will interfere with the WWVB signal.
Daylight Savings Time
The National Institute of Standards and Technology and WWVB encode a special DST 'bit' in the WWVB transmission for DST. Your Radio Controlled clock will read this information and automatically advance the hands one hour in the spring and eleven hours in the fall.
Arizona and Indiana
If you live in an area that does not recognize DST you must press the (unmarked) DST button for one second to deactivate your clock's DST program. To reactivate the DST program simply press the DST button again for one second.
Frequently Asked Questions
Q. How long will the battery last?
A. A good AA alkaline battery will last over one year. If your clock is located in an area with little interference
where it can quickly receive a signal the battery can last much longer than one year.
4) Place the clock near a westerly window overnight and then the clock should reset overnight and read the correct time.
**If you had previously pushed the manual mode flap (switch), take a pen or paperclip and make sure it is pulled out in the off position.
If you live in the Eastern Time Zone, you should manually set your clock using the following procedure:
1. Take the battery out of the clock.
2. Press the manual time setting tab on the back of the clock 15 times.
3. Put the battery back into the clock.
4. The clock will go to 4:00, 8:00, or 12:00 and stay there while waiting for the signal.
5. Immediately after your clock stops at 4:00, 8:00, or 12:00, push and hold the manual time set tab until you get to the correct time.
If you release the button at the incorrect time, take the battery out and start again.
These clocks will automatically continue to check and adjust after April 1.
For more information on the NIST and radio controlled time, see http://www.boulder.nist.gov/timefreq/
Troubleshooting
The wonderful advantage of owning a radio-controlled clock is that it is virtually trouble-free. If the clock receives a clear signal it will set itself perfectly. If it does not receive a signal consider the following:
Battery - The clock must have a fresh battery to receive and process the time signal.
Location - Try a different location, ideally near a window. It should be at least six feet from computers, TVs, air conditioners, other Radio-Controlled clocks and other electrical appliances that cause interference.
Weather - Electrical storms between you and Colorado during the night will interfere with the WWVB signal.
Daylight Savings Time
The National Institute of Standards and Technology and WWVB encode a special DST 'bit' in the WWVB transmission for DST. Your Radio Controlled clock will read this information and automatically advance the hands one hour in the spring and eleven hours in the fall.
Arizona and Indiana
If you live in an area that does not recognize DST you must press the (unmarked) DST button for one second to deactivate your clock's DST program. To reactivate the DST program simply press the DST button again for one second.
Frequently Asked Questions
Q. How long will the battery last?
A. A good AA alkaline battery will last over one year. If your clock is located in an area with little interference
where it can quickly receive a signal the battery can last much longer than one year.
Q. Can a Radio Controlled clock be used outdoors?
A. Yes, but only in a dry environment and in a temperature range between 41 F and 131 F. The clock is NOT
water-resistant.
Q. Can the Radio Controlled clock be wired to control timing circuits?
A. No.
Q. Why does the second-hand move only once every two seconds?
A. When the battery drops below 1.25 volts the clock indicates that it is time to change the battery by advancing the second hand in two-second steps. The operating voltage range is 1.25 to 1.75 volts.
Grandfather Clocks - Atomic Clocks - Wall Clocks
Free Nationwide Shipping our selections
Hd-1688 Sheng Bang Manual
See the new WIFI Clocks that use your home network to adjust your clock to the correct time
